Magentus Practice Management FHIR Implementation Guide
1.2.35 - ci-build

Magentus Practice Management FHIR Implementation Guide - Local Development build (v1.2.35) built by the FHIR (HL7® FHIR® Standard) Build Tools. See the Directory of published versions

Resource Profile: EOrdersEncounter - Detailed Descriptions

Draft as of 2025-03-02

Definitions for the eorders-encounter resource profile.

Guidance on how to interpret the contents of this table can be found here

0. Encounter
Definition

An interaction between a patient and healthcare provider(s) for the purpose of providing healthcare service(s) or assessing the health status of a patient.

ShortAn encounter in an Australian healthcare contextAn interaction during which services are provided to the patient
Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesVisit
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Encounter.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeidstring
Is Modifierfalse
Must Supporttrue
Summarytrue
4. Encounter.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Encounter.extension:encounterDescription
Slice NameencounterDescription
Definition

Description, overview or summary of a clinical event and its reasons.

ShortDescription, overview or summary of an encounter
Control0..1
This element is affected by the following invariants: ele-1
TypeExtension(Encounter Description) (Extension Type: string)
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
8. Encounter.extension:associatedHealthcareService
Slice NameassociatedHealthcareService
Definition

Healthcare service relating to a resource.

ShortAssociated healthcare service
Control0..*
This element is affected by the following invariants: ele-1
TypeExtension(Associated Healthcare Service) (Extension Type: Reference(HealthcareService))
Is Modifierfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
10. Encounter.modifierExtension
Definition

May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

ShortExtensions that cannot be ignored
Comments

There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

Control0..*
TypeExtension
Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
Summaryfalse
Requirements

Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

Alternate Namesextensions, user content
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
12. Encounter.status
Definition

planned | arrived | triaged | in-progress | onleave | finished | cancelled +.

ShortAssumes the encounter where the request was made is finishedplanned | arrived | triaged | in-progress | onleave | finished | cancelled +
Comments

Note that internal business rules will determine the appropriate transitions that may occur between statuses (and also classes).

Control1..1
BindingThe codes SHALL be taken from EncounterStatushttp://hl7.org/fhir/ValueSet/encounter-status|4.0.1
(required to http://hl7.org/fhir/ValueSet/encounter-status|4.0.1)

Current state of the encounter.

Typecode
Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Must Supporttrue
Summarytrue
Pattern Valuefinished
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
14. Encounter.class
Definition

Concepts representing classification of patient encounter such as ambulatory (outpatient), inpatient, emergency, home health or others due to local variations.

ShortAssumes the encounter where the request was made is Outpatient (i.e. AMB ambulatory)Classification of patient encounter
Control1..1
BindingUnless not suitable, these codes SHALL be taken from ActEncounterCode - AU Extendedhttp://terminology.hl7.org/ValueSet/v3-ActEncounterCode
(extensible to http://terminology.hl7.org.au/ValueSet/v3-ActEncounterCode-extended)
TypeCoding
Is Modifierfalse
Must Supporttrue
Summarytrue
Pattern Value{
  "system" : "http://terminology.hl7.org/CodeSystem/v3-ActCode",
  "code" : "AMB"
}
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
16. Encounter.subject
Definition

The patient or group present at the encounter.

ShortPatient the request is forThe patient or group present at the encounter
Comments

While the encounter is always about the patient, the patient might not actually be known in all contexts of use, and there may be a group of patients that could be anonymous (such as in a group therapy for Alcoholics Anonymous - where the recording of the encounter could be used for billing on the number of people/staff and not important to the context of the specific patients) or alternately in veterinary care a herd of sheep receiving treatment (where the animals are not individually tracked).

Control0..1
TypeReference(Genie Patient, Patient, Group)
Is Modifierfalse
Must Supporttrue
Summarytrue
Alternate Namespatient
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
18. Encounter.subject.reference
Definition

A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

ShortRelative reference to PatientLiteral reference, Relative, internal or absolute URL
Comments

Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

Control10..1
This element is affected by the following invariants: ref-1
Typestring
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))

Guidance on how to interpret the contents of this table can be found here

0. Encounter
2. Encounter.id
Must Supporttrue
4. Encounter.status
ShortAssumes the encounter where the request was made is finished
Must Supporttrue
Pattern Valuefinished
6. Encounter.class
ShortAssumes the encounter where the request was made is Outpatient (i.e. AMB ambulatory)
Must Supporttrue
Pattern Value{
  "system" : "http://terminology.hl7.org/CodeSystem/v3-ActCode",
  "code" : "AMB"
}
8. Encounter.subject
ShortPatient the request is for
TypeReference(Genie Patient)
Must Supporttrue
10. Encounter.subject.reference
ShortRelative reference to Patient
Control1..?

Guidance on how to interpret the contents of this table can be found here

0. Encounter
Definition

An interaction between a patient and healthcare provider(s) for the purpose of providing healthcare service(s) or assessing the health status of a patient.

ShortAn encounter in an Australian healthcare context
Control0..*
Is Modifierfalse
Summaryfalse
Alternate NamesVisit
Invariantsdom-2: If the resource is contained in another resource, it SHALL NOT contain nested Resources (contained.contained.empty())
dom-3: If the resource is contained in another resource, it SHALL be referred to from elsewhere in the resource or SHALL refer to the containing resource (contained.where((('#'+id in (%resource.descendants().reference | %resource.descendants().as(canonical) | %resource.descendants().as(uri) | %resource.descendants().as(url))) or descendants().where(reference = '#').exists() or descendants().where(as(canonical) = '#').exists() or descendants().where(as(canonical) = '#').exists()).not()).trace('unmatched', id).empty())
dom-4: If a resource is contained in another resource, it SHALL NOT have a meta.versionId or a meta.lastUpdated (contained.meta.versionId.empty() and contained.meta.lastUpdated.empty())
dom-5: If a resource is contained in another resource, it SHALL NOT have a security label (contained.meta.security.empty())
dom-6: A resource should have narrative for robust management (text.`div`.exists())
2. Encounter.id
Definition

The logical id of the resource, as used in the URL for the resource. Once assigned, this value never changes.

ShortLogical id of this artifact
Comments

The only time that a resource does not have an id is when it is being submitted to the server using a create operation.

Control0..1
Typeid
Is Modifierfalse
Must Supporttrue
Summarytrue
4. Encounter.meta
Definition

The metadata about the resource. This is content that is maintained by the infrastructure. Changes to the content might not always be associated with version changes to the resource.

ShortMetadata about the resource
Control0..1
TypeMeta
Is Modifierfalse
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
6. Encounter.implicitRules
Definition

A reference to a set of rules that were followed when the resource was constructed, and which must be understood when processing the content. Often, this is a reference to an implementation guide that defines the special rules along with other profiles etc.

ShortA set of rules under which this content was created
Comments

Asserting this rule set restricts the content to be only understood by a limited set of trading partners. This inherently limits the usefulness of the data in the long term. However, the existing health eco-system is highly fractured, and not yet ready to define, collect, and exchange data in a generally computable sense. Wherever possible, implementers and/or specification writers should avoid using this element. Often, when used, the URL is a reference to an implementation guide that defines these special rules as part of it's narrative along with other profiles, value sets, etc.

Control0..1
Typeuri
Is Modifiertrue because This element is labeled as a modifier because the implicit rules may provide additional knowledge about the resource that modifies it's meaning or interpretation
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summarytrue
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
8. Encounter.language
Definition

The base language in which the resource is written.

ShortLanguage of the resource content
Comments

Language is provided to support indexing and accessibility (typically, services such as text to speech use the language tag). The html language tag in the narrative applies to the narrative. The language tag on the resource may be used to specify the language of other presentations generated from the data in the resource. Not all the content has to be in the base language. The Resource.language should not be assumed to apply to the narrative automatically. If a language is specified, it should it also be specified on the div element in the html (see rules in HTML5 for information about the relationship between xml:lang and the html lang attribute).

Control0..1
BindingThe codes SHOULD be taken from CommonLanguages
(preferred to http://hl7.org/fhir/ValueSet/languages)

A human language.

Additional BindingsPurpose
AllLanguagesMax Binding
Typecode
Is Modifierfalse
Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
10. Encounter.text
Definition

A human-readable narrative that contains a summary of the resource and can be used to represent the content of the resource to a human. The narrative need not encode all the structured data, but is required to contain sufficient detail to make it "clinically safe" for a human to just read the narrative. Resource definitions may define what content should be represented in the narrative to ensure clinical safety.

ShortText summary of the resource, for human interpretation
Comments

Contained resources do not have narrative. Resources that are not contained SHOULD have a narrative. In some cases, a resource may only have text with little or no additional discrete data (as long as all minOccurs=1 elements are satisfied). This may be necessary for data from legacy systems where information is captured as a "text blob" or where text is additionally entered raw or narrated and encoded information is added later.

Control0..1
TypeNarrative
Is Modifierfalse
Summaryfalse
Alternate Namesnarrative, html, xhtml, display
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
12. Encounter.contained
Definition

These resources do not have an independent existence apart from the resource that contains them - they cannot be identified independently, and nor can they have their own independent transaction scope.

ShortContained, inline Resources
Comments

This should never be done when the content can be identified properly, as once identification is lost, it is extremely difficult (and context dependent) to restore it again. Contained resources may have profiles and tags In their meta elements, but SHALL NOT have security labels.

Control0..*
TypeResource
Is Modifierfalse
Summaryfalse
Alternate Namesinline resources, anonymous resources, contained resources
14. Encounter.extension
Definition

An Extension

ShortExtension
Control0..*
TypeExtension
Is Modifierfalse
Summaryfalse
Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
SlicingThis element introduces a set of slices on Encounter.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
  • value @ url
  • 16. Encounter.extension:encounterDescription
    Slice NameencounterDescription
    Definition

    Description, overview or summary of a clinical event and its reasons.

    ShortDescription, overview or summary of an encounter
    Control0..1
    This element is affected by the following invariants: ele-1
    TypeExtension(Encounter Description) (Extension Type: string)
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    18. Encounter.extension:associatedHealthcareService
    Slice NameassociatedHealthcareService
    Definition

    Healthcare service relating to a resource.

    ShortAssociated healthcare service
    Control0..*
    This element is affected by the following invariants: ele-1
    TypeExtension(Associated Healthcare Service) (Extension Type: Reference(HealthcareService))
    Is Modifierfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    20. Encounter.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the resource and that modifies the understanding of the element that contains it and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer is allowed to define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the resource that contains them
    Summaryfalse
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    22. Encounter.identifier
    Definition

    Identifier(s) by which this encounter is known.

    ShortIdentifier(s) by which this encounter is known
    NoteThis is a business identifier, not a resource identifier (see discussion)
    Control0..*
    TypeIdentifier
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    24. Encounter.status
    Definition

    planned | arrived | triaged | in-progress | onleave | finished | cancelled +.

    ShortAssumes the encounter where the request was made is finished
    Comments

    Note that internal business rules will determine the appropriate transitions that may occur between statuses (and also classes).

    Control1..1
    BindingThe codes SHALL be taken from EncounterStatus
    (required to http://hl7.org/fhir/ValueSet/encounter-status|4.0.1)

    Current state of the encounter.

    Typecode
    Is Modifiertrue because This element is labeled as a modifier because it is a status element that contains status entered-in-error which means that the resource should not be treated as valid
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Must Supporttrue
    Summarytrue
    Pattern Valuefinished
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    26. Encounter.statusHistory
    Definition

    The status history permits the encounter resource to contain the status history without needing to read through the historical versions of the resource, or even have the server store them.

    ShortList of past encounter statuses
    Comments

    The current status is always found in the current version of the resource, not the status history.

    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    28. Encounter.statusHistory.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    30. Encounter.statusHistory.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    32. Encounter.statusHistory.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    34. Encounter.statusHistory.status
    Definition

    planned | arrived | triaged | in-progress | onleave | finished | cancelled +.

    Shortplanned | arrived | triaged | in-progress | onleave | finished | cancelled +
    Control1..1
    BindingThe codes SHALL be taken from EncounterStatus
    (required to http://hl7.org/fhir/ValueSet/encounter-status|4.0.1)

    Current state of the encounter.

    Typecode
    Is Modifierfalse
    Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    36. Encounter.statusHistory.period
    Definition

    The time that the episode was in the specified status.

    ShortThe time that the episode was in the specified status
    Control1..1
    TypePeriod
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    38. Encounter.class
    Definition

    Concepts representing classification of patient encounter such as ambulatory (outpatient), inpatient, emergency, home health or others due to local variations.

    ShortAssumes the encounter where the request was made is Outpatient (i.e. AMB ambulatory)
    Control1..1
    BindingUnless not suitable, these codes SHALL be taken from ActEncounterCode - AU Extended
    (extensible to http://terminology.hl7.org.au/ValueSet/v3-ActEncounterCode-extended)
    TypeCoding
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Pattern Value{
      "system" : "http://terminology.hl7.org/CodeSystem/v3-ActCode",
      "code" : "AMB"
    }
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    40. Encounter.classHistory
    Definition

    The class history permits the tracking of the encounters transitions without needing to go through the resource history. This would be used for a case where an admission starts of as an emergency encounter, then transitions into an inpatient scenario. Doing this and not restarting a new encounter ensures that any lab/diagnostic results can more easily follow the patient and not require re-processing and not get lost or cancelled during a kind of discharge from emergency to inpatient.

    ShortList of past encounter classes
    Control0..*
    TypeBackboneElement
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    42. Encounter.classHistory.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    44. Encounter.classHistory.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    46. Encounter.classHistory.modifierExtension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

    Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

    ShortExtensions that cannot be ignored even if unrecognized
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
    Summarytrue
    Requirements

    Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

    Alternate Namesextensions, user content, modifiers
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    48. Encounter.classHistory.class
    Definition

    inpatient | outpatient | ambulatory | emergency +.

    Shortinpatient | outpatient | ambulatory | emergency +
    Control1..1
    BindingUnless not suitable, these codes SHALL be taken from ActEncounterCode
    (extensible to http://terminology.hl7.org/ValueSet/v3-ActEncounterCode)

    Classification of the encounter.

    TypeCoding
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    50. Encounter.classHistory.period
    Definition

    The time that the episode was in the specified class.

    ShortThe time that the episode was in the specified class
    Control1..1
    TypePeriod
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    52. Encounter.type
    Definition

    Specific type of encounter (e.g. e-mail consultation, surgical day-care, skilled nursing, rehabilitation).

    ShortSpecific type of encounter
    Comments

    Since there are many ways to further classify encounters, this element is 0..*.

    Control0..*
    BindingThe codes SHOULD be taken from Encounter Type .
    (preferred to https://healthterminologies.gov.au/fhir/ValueSet/encounter-type-1)
    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    54. Encounter.serviceType
    Definition

    Broad categorization of the service that is to be provided (e.g. cardiology).

    ShortSpecific type of service
    Control0..1
    BindingThe codes SHOULD be taken from Service Type .
    (preferred to https://healthterminologies.gov.au/fhir/ValueSet/service-type-1)
    TypeCodeableConcept
    Is Modifierfalse
    Summarytrue
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    56. Encounter.priority
    Definition

    Indicates the urgency of the encounter.

    ShortIndicates the urgency of the encounter
    Control0..1
    BindingFor example codes, see ActPriority
    (example to http://terminology.hl7.org/ValueSet/v3-ActPriority)

    Indicates the urgency of the encounter.

    TypeCodeableConcept
    Is Modifierfalse
    Summaryfalse
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    58. Encounter.subject
    Definition

    The patient or group present at the encounter.

    ShortPatient the request is for
    Comments

    While the encounter is always about the patient, the patient might not actually be known in all contexts of use, and there may be a group of patients that could be anonymous (such as in a group therapy for Alcoholics Anonymous - where the recording of the encounter could be used for billing on the number of people/staff and not important to the context of the specific patients) or alternately in veterinary care a herd of sheep receiving treatment (where the animals are not individually tracked).

    Control0..1
    TypeReference(Genie Patient)
    Is Modifierfalse
    Must Supporttrue
    Summarytrue
    Alternate Namespatient
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    60. Encounter.subject.id
    Definition

    Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

    ShortUnique id for inter-element referencing
    Control0..1
    Typestring
    Is Modifierfalse
    XML FormatIn the XML format, this property is represented as an attribute.
    Summaryfalse
    62. Encounter.subject.extension
    Definition

    May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

    ShortAdditional content defined by implementations
    Comments

    There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

    Control0..*
    TypeExtension
    Is Modifierfalse
    Summaryfalse
    Alternate Namesextensions, user content
    Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
    ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
    SlicingThis element introduces a set of slices on Encounter.subject.extension. The slices areUnordered and Open, and can be differentiated using the following discriminators:
    • value @ url
    • 64. Encounter.subject.reference
      Definition

      A reference to a location at which the other resource is found. The reference may be a relative reference, in which case it is relative to the service base URL, or an absolute URL that resolves to the location where the resource is found. The reference may be version specific or not. If the reference is not to a FHIR RESTful server, then it should be assumed to be version specific. Internal fragment references (start with '#') refer to contained resources.

      ShortRelative reference to Patient
      Comments

      Using absolute URLs provides a stable scalable approach suitable for a cloud/web context, while using relative/logical references provides a flexible approach suitable for use when trading across closed eco-system boundaries. Absolute URLs do not need to point to a FHIR RESTful server, though this is the preferred approach. If the URL conforms to the structure "/[type]/[id]" then it should be assumed that the reference is to a FHIR RESTful server.

      Control1..1
      This element is affected by the following invariants: ref-1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      66. Encounter.subject.type
      Definition

      The expected type of the target of the reference. If both Reference.type and Reference.reference are populated and Reference.reference is a FHIR URL, both SHALL be consistent.

      The type is the Canonical URL of Resource Definition that is the type this reference refers to. References are URLs that are relative to http://hl7.org/fhir/StructureDefinition/ e.g. "Patient" is a reference to http://hl7.org/fhir/StructureDefinition/Patient. Absolute URLs are only allowed for logical models (and can only be used in references in logical models, not resources).

      ShortType the reference refers to (e.g. "Patient")
      Comments

      This element is used to indicate the type of the target of the reference. This may be used which ever of the other elements are populated (or not). In some cases, the type of the target may be determined by inspection of the reference (e.g. a RESTful URL) or by resolving the target of the reference; if both the type and a reference is provided, the reference SHALL resolve to a resource of the same type as that specified.

      Control0..1
      BindingUnless not suitable, these codes SHALL be taken from ResourceType
      (extensible to http://hl7.org/fhir/ValueSet/resource-types)

      Aa resource (or, for logical models, the URI of the logical model).

      Typeuri
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      68. Encounter.subject.identifier
      Definition

      An identifier for the target resource. This is used when there is no way to reference the other resource directly, either because the entity it represents is not available through a FHIR server, or because there is no way for the author of the resource to convert a known identifier to an actual location. There is no requirement that a Reference.identifier point to something that is actually exposed as a FHIR instance, but it SHALL point to a business concept that would be expected to be exposed as a FHIR instance, and that instance would need to be of a FHIR resource type allowed by the reference.

      ShortLogical reference, when literal reference is not known
      Comments

      When an identifier is provided in place of a reference, any system processing the reference will only be able to resolve the identifier to a reference if it understands the business context in which the identifier is used. Sometimes this is global (e.g. a national identifier) but often it is not. For this reason, none of the useful mechanisms described for working with references (e.g. chaining, includes) are possible, nor should servers be expected to be able resolve the reference. Servers may accept an identifier based reference untouched, resolve it, and/or reject it - see CapabilityStatement.rest.resource.referencePolicy.

      When both an identifier and a literal reference are provided, the literal reference is preferred. Applications processing the resource are allowed - but not required - to check that the identifier matches the literal reference

      Applications converting a logical reference to a literal reference may choose to leave the logical reference present, or remove it.

      Reference is intended to point to a structure that can potentially be expressed as a FHIR resource, though there is no need for it to exist as an actual FHIR resource instance - except in as much as an application wishes to actual find the target of the reference. The content referred to be the identifier must meet the logical constraints implied by any limitations on what resource types are permitted for the reference. For example, it would not be legitimate to send the identifier for a drug prescription if the type were Reference(Observation|DiagnosticReport). One of the use-cases for Reference.identifier is the situation where no FHIR representation exists (where the type is Reference (Any).

      NoteThis is a business identifier, not a resource identifier (see discussion)
      Control0..1
      TypeIdentifier
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      70. Encounter.subject.display
      Definition

      Plain text narrative that identifies the resource in addition to the resource reference.

      ShortText alternative for the resource
      Comments

      This is generally not the same as the Resource.text of the referenced resource. The purpose is to identify what's being referenced, not to fully describe it.

      Control0..1
      Typestring
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      72. Encounter.episodeOfCare
      Definition

      Where a specific encounter should be classified as a part of a specific episode(s) of care this field should be used. This association can facilitate grouping of related encounters together for a specific purpose, such as government reporting, issue tracking, association via a common problem. The association is recorded on the encounter as these are typically created after the episode of care and grouped on entry rather than editing the episode of care to append another encounter to it (the episode of care could span years).

      ShortEpisode(s) of care that this encounter should be recorded against
      Control0..*
      TypeReference(EpisodeOfCare)
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      74. Encounter.basedOn
      Definition

      The request this encounter satisfies (e.g. incoming referral or procedure request).

      ShortThe ServiceRequest that initiated this encounter
      Control0..*
      TypeReference(ServiceRequest)
      Is Modifierfalse
      Summaryfalse
      Alternate NamesincomingReferral
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      76. Encounter.participant
      Definition

      The list of people responsible for providing the service.

      ShortList of participants involved in the encounter
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      78. Encounter.participant.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      80. Encounter.participant.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      82. Encounter.participant.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      84. Encounter.participant.type
      Definition

      Role of participant in encounter.

      ShortRole of participant in encounter
      Comments

      The participant type indicates how an individual participates in an encounter. It includes non-practitioner participants, and for practitioners this is to describe the action type in the context of this encounter (e.g. Admitting Dr, Attending Dr, Translator, Consulting Dr). This is different to the practitioner roles which are functional roles, derived from terms of employment, education, licensing, etc.

      Control0..*
      BindingUnless not suitable, these codes SHALL be taken from ParticipantType
      (extensible to http://hl7.org/fhir/ValueSet/encounter-participant-type)

      Role of participant in encounter.

      TypeCodeableConcept
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      86. Encounter.participant.period
      Definition

      The period of time that the specified participant participated in the encounter. These can overlap or be sub-sets of the overall encounter's period.

      ShortPeriod of time during the encounter that the participant participated
      Control0..1
      TypePeriod
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      88. Encounter.participant.individual
      Definition

      Persons involved in the encounter other than the patient.

      ShortPersons involved in the encounter other than the patient
      Control0..1
      TypeReference(Practitioner, PractitionerRole, RelatedPerson)
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      90. Encounter.appointment
      Definition

      The appointment that scheduled this encounter.

      ShortThe appointment that scheduled this encounter
      Control0..*
      TypeReference(Appointment)
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      92. Encounter.period
      Definition

      The start and end time of the encounter.

      ShortThe start and end time of the encounter
      Comments

      If not (yet) known, the end of the Period may be omitted.

      Control0..1
      TypePeriod
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      94. Encounter.length
      Definition

      Quantity of time the encounter lasted. This excludes the time during leaves of absence.

      ShortQuantity of time the encounter lasted (less time absent)
      Comments

      May differ from the time the Encounter.period lasted because of leave of absence.

      Control0..1
      TypeDuration
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      96. Encounter.reasonCode
      Definition

      Reason the encounter takes place, expressed as a code. For admissions, this can be used for a coded admission diagnosis.

      ShortCoded reason the encounter takes place
      Comments

      For systems that need to know which was the primary diagnosis, these will be marked with the standard extension primaryDiagnosis (which is a sequence value rather than a flag, 1 = primary diagnosis).

      Control0..*
      BindingThe codes SHOULD be taken from EncounterReasonCodes
      (preferred to http://hl7.org/fhir/ValueSet/encounter-reason)

      Reason why the encounter takes place.

      TypeCodeableConcept
      Is Modifierfalse
      Summarytrue
      Alternate NamesIndication, Admission diagnosis
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      98. Encounter.reasonReference
      Definition

      Reason the encounter takes place, expressed as a code. For admissions, this can be used for a coded admission diagnosis.

      ShortReason the encounter takes place (reference)
      Comments

      For systems that need to know which was the primary diagnosis, these will be marked with the standard extension primaryDiagnosis (which is a sequence value rather than a flag, 1 = primary diagnosis).

      Control0..*
      TypeReference(Condition, Procedure, Observation, ImmunizationRecommendation)
      Is Modifierfalse
      Summarytrue
      Alternate NamesIndication, Admission diagnosis
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      100. Encounter.diagnosis
      Definition

      The list of diagnosis relevant to this encounter.

      ShortThe list of diagnosis relevant to this encounter
      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summarytrue
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      102. Encounter.diagnosis.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      104. Encounter.diagnosis.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      106. Encounter.diagnosis.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      108. Encounter.diagnosis.condition
      Definition

      Reason the encounter takes place, as specified using information from another resource. For admissions, this is the admission diagnosis. The indication will typically be a Condition (with other resources referenced in the evidence.detail), or a Procedure.

      ShortThe diagnosis or procedure relevant to the encounter
      Comments

      For systems that need to know which was the primary diagnosis, these will be marked with the standard extension primaryDiagnosis (which is a sequence value rather than a flag, 1 = primary diagnosis).

      Control1..1
      TypeReference(Condition, Procedure)
      Is Modifierfalse
      Summarytrue
      Alternate NamesAdmission diagnosis, discharge diagnosis, indication
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      110. Encounter.diagnosis.use
      Definition

      Role that this diagnosis has within the encounter (e.g. admission, billing, discharge …).

      ShortRole that this diagnosis has within the encounter (e.g. admission, billing, discharge …)
      Control0..1
      BindingThe codes SHOULD be taken from DiagnosisRole
      (preferred to http://hl7.org/fhir/ValueSet/diagnosis-role)

      The type of diagnosis this condition represents.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      112. Encounter.diagnosis.rank
      Definition

      Ranking of the diagnosis (for each role type).

      ShortRanking of the diagnosis (for each role type)
      Control0..1
      TypepositiveInt
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      114. Encounter.account
      Definition

      The set of accounts that may be used for billing for this Encounter.

      ShortThe set of accounts that may be used for billing for this Encounter
      Comments

      The billing system may choose to allocate billable items associated with the Encounter to different referenced Accounts based on internal business rules.

      Control0..*
      TypeReference(Account)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      116. Encounter.hospitalization
      Definition

      Details about the admission to a healthcare service.

      ShortDetails about the admission to a healthcare service
      Comments

      An Encounter may cover more than just the inpatient stay. Contexts such as outpatients, community clinics, and aged care facilities are also included.

      The duration recorded in the period of this encounter covers the entire scope of this hospitalization record.

      Control0..1
      TypeBackboneElement
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      118. Encounter.hospitalization.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      120. Encounter.hospitalization.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      122. Encounter.hospitalization.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      124. Encounter.hospitalization.preAdmissionIdentifier
      Definition

      Pre-admission identifier.

      ShortPre-admission identifier
      Control0..1
      TypeIdentifier
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      126. Encounter.hospitalization.origin
      Definition

      The location/organization from which the patient came before admission.

      ShortThe location/organization from which the patient came before admission
      Control0..1
      TypeReference(Location, Organization)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      128. Encounter.hospitalization.admitSource
      Definition

      From where patient was admitted (physician referral, transfer).

      ShortFrom where patient was admitted (physician referral, transfer)
      Control0..1
      BindingThe codes SHOULD be taken from AdmitSource
      (preferred to http://hl7.org/fhir/ValueSet/encounter-admit-source)

      From where the patient was admitted.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      130. Encounter.hospitalization.reAdmission
      Definition

      Whether this hospitalization is a readmission and why if known.

      ShortThe type of hospital re-admission that has occurred (if any). If the value is absent, then this is not identified as a readmission
      Control0..1
      BindingFor example codes, see hl7VS-re-admissionIndicator
      (example to http://terminology.hl7.org/ValueSet/v2-0092)

      The reason for re-admission of this hospitalization encounter.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      132. Encounter.hospitalization.dietPreference
      Definition

      Diet preferences reported by the patient.

      ShortDiet preferences reported by the patient
      Comments

      For example, a patient may request both a dairy-free and nut-free diet preference (not mutually exclusive).

      Control0..*
      BindingFor example codes, see Diet
      (example to http://hl7.org/fhir/ValueSet/encounter-diet)

      Medical, cultural or ethical food preferences to help with catering requirements.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Requirements

      Used to track patient's diet restrictions and/or preference. For a complete description of the nutrition needs of a patient during their stay, one should use the nutritionOrder resource which links to Encounter.

      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      134. Encounter.hospitalization.specialCourtesy
      Definition

      Special courtesies (VIP, board member).

      ShortSpecial courtesies (VIP, board member)
      Control0..*
      BindingThe codes SHOULD be taken from SpecialCourtesy
      (preferred to http://hl7.org/fhir/ValueSet/encounter-special-courtesy)

      Special courtesies.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      136. Encounter.hospitalization.specialArrangement
      Definition

      Any special requests that have been made for this hospitalization encounter, such as the provision of specific equipment or other things.

      ShortWheelchair, translator, stretcher, etc.
      Control0..*
      BindingThe codes SHOULD be taken from SpecialArrangements
      (preferred to http://hl7.org/fhir/ValueSet/encounter-special-arrangements)

      Special arrangements.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      138. Encounter.hospitalization.destination
      Definition

      Location/organization to which the patient is discharged.

      ShortLocation/organization to which the patient is discharged
      Control0..1
      TypeReference(Location, Organization)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      140. Encounter.hospitalization.dischargeDisposition
      Definition

      Category or kind of location after discharge.

      ShortSeparation Mode
      Control0..1
      BindingUnless not suitable, these codes SHALL be taken from Separation Mode .
      (extensible to https://healthterminologies.gov.au/fhir/ValueSet/separation-mode-1)
      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      142. Encounter.location
      Definition

      List of locations where the patient has been during this encounter.

      ShortList of locations where the patient has been
      Comments

      Virtual encounters can be recorded in the Encounter by specifying a location reference to a location of type "kind" such as "client's home" and an encounter.class = "virtual".

      Control0..*
      TypeBackboneElement
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      144. Encounter.location.id
      Definition

      Unique id for the element within a resource (for internal references). This may be any string value that does not contain spaces.

      ShortUnique id for inter-element referencing
      Control0..1
      Typestring
      Is Modifierfalse
      XML FormatIn the XML format, this property is represented as an attribute.
      Summaryfalse
      146. Encounter.location.extension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension.

      ShortAdditional content defined by implementations
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifierfalse
      Summaryfalse
      Alternate Namesextensions, user content
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      148. Encounter.location.modifierExtension
      Definition

      May be used to represent additional information that is not part of the basic definition of the element and that modifies the understanding of the element in which it is contained and/or the understanding of the containing element's descendants. Usually modifier elements provide negation or qualification. To make the use of extensions safe and manageable, there is a strict set of governance applied to the definition and use of extensions. Though any implementer can define an extension, there is a set of requirements that SHALL be met as part of the definition of the extension. Applications processing a resource are required to check for modifier extensions.

      Modifier extensions SHALL NOT change the meaning of any elements on Resource or DomainResource (including cannot change the meaning of modifierExtension itself).

      ShortExtensions that cannot be ignored even if unrecognized
      Comments

      There can be no stigma associated with the use of extensions by any application, project, or standard - regardless of the institution or jurisdiction that uses or defines the extensions. The use of extensions is what allows the FHIR specification to retain a core level of simplicity for everyone.

      Control0..*
      TypeExtension
      Is Modifiertrue because Modifier extensions are expected to modify the meaning or interpretation of the element that contains them
      Summarytrue
      Requirements

      Modifier extensions allow for extensions that cannot be safely ignored to be clearly distinguished from the vast majority of extensions which can be safely ignored. This promotes interoperability by eliminating the need for implementers to prohibit the presence of extensions. For further information, see the definition of modifier extensions.

      Alternate Namesextensions, user content, modifiers
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      ext-1: Must have either extensions or value[x], not both (extension.exists() != value.exists())
      150. Encounter.location.location
      Definition

      The location where the encounter takes place.

      ShortLocation the encounter takes place
      Control1..1
      TypeReference(Location)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      152. Encounter.location.status
      Definition

      The status of the participants' presence at the specified location during the period specified. If the participant is no longer at the location, then the period will have an end date/time.

      Shortplanned | active | reserved | completed
      Comments

      When the patient is no longer active at a location, then the period end date is entered, and the status may be changed to completed.

      Control0..1
      BindingThe codes SHALL be taken from EncounterLocationStatus
      (required to http://hl7.org/fhir/ValueSet/encounter-location-status|4.0.1)

      The status of the location.

      Typecode
      Is Modifierfalse
      Primitive ValueThis primitive element may be present, or absent, or replaced by an extension
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      154. Encounter.location.physicalType
      Definition

      This will be used to specify the required levels (bed/ward/room/etc.) desired to be recorded to simplify either messaging or query.

      ShortThe physical type of the location (usually the level in the location hierachy - bed room ward etc.)
      Comments

      This information is de-normalized from the Location resource to support the easier understanding of the encounter resource and processing in messaging or query.

      There may be many levels in the hierachy, and this may only pic specific levels that are required for a specific usage scenario.

      Control0..1
      BindingFor example codes, see LocationType
      (example to http://hl7.org/fhir/ValueSet/location-physical-type)

      Physical form of the location.

      TypeCodeableConcept
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      156. Encounter.location.period
      Definition

      Time period during which the patient was present at the location.

      ShortTime period during which the patient was present at the location
      Control0..1
      TypePeriod
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      158. Encounter.serviceProvider
      Definition

      The organization that is primarily responsible for this Encounter's services. This MAY be the same as the organization on the Patient record, however it could be different, such as if the actor performing the services was from an external organization (which may be billed seperately) for an external consultation. Refer to the example bundle showing an abbreviated set of Encounters for a colonoscopy.

      ShortThe organization (facility) responsible for this encounter
      Control0..1
      TypeReference(Organization)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))
      160. Encounter.partOf
      Definition

      Another Encounter of which this encounter is a part of (administratively or in time).

      ShortAnother Encounter this encounter is part of
      Comments

      This is also used for associating a child's encounter back to the mother's encounter.

      Refer to the Notes section in the Patient resource for further details.

      Control0..1
      TypeReference(Encounter)
      Is Modifierfalse
      Summaryfalse
      Invariantsele-1: All FHIR elements must have a @value or children (hasValue() or (children().count() > id.count()))